How to Repair Hole in Roof

How to Repair Hole in Roof?

You get your roof inspected and how it feels if there are holes in it. But there is no need to worry because after hailstorms and storms the roofs get holes. But getting them repaired on time is very important. Do you know how to repair these holes?

If not repaired in time, these holes can damage your roof. Through them, water leakage starts, which can damage the foundation of your house. Repairing them should be your top priority.

Another important thing is the size of the hole. If the hole is small, you can repair it yourself by reading our guide, but if the hole is large, you may need the help of a professional roofer.

In this blog post we will learn how to repair hole in roof and also tell you about all the tools that will be used to repair the hole.

Steps to Repair Hole in Roof?

The first thing you need to do to repair roof holes is to have all the necessary tools. If you do the repair with the necessary tools, you can do it easily, otherwise you may increase the damage. First of all read the equipment requirement given below.

  • Shingles
  • Pray bar
  • Gloves
  • Claw Hammer
  • Liquid nails
  • Circular Saw
  • Roofing nails
  • Tar Paper
  • Putty Knife
  • Roofing Cement

When you have all these tools, you can repair the hole in the roof. Let us see all this process step by step.

Step 1: Remove Damaged Shingles

First you should inspect the affected area and remove the damaged shingles from there. To remove shingles, start at the top and work your way down. You can remove nails with the back of a claw hammer.

The purpose of removing shingles is to ensure that water does not enter the internal structure of the roof through holes.

If this entire area needs to be replaced, it’s best to call a professional roofer because if you ignore it, this small damage can ruin the entire roof.

Step 2: Remove Damage Decking

Cut the decking 3-4 inches deep into a rectangular shape with a circular saw to separate the damage area. But in the meantime, take care not to cut the rafter. You can also cut the decking in two parts to avoid this. Caution is essential when repairing a hole in the roof so that you don’t do any more damage.

Step 3: Build a Frame

In the third step, first you can use the 2×4 lumber on all sides and make a frame out of it. Attach the frame on each side. Attach to the frame to the rafters at the top and bottom. So your new frame is ready.

Step 4: Patch Installation

In patch installation fix the frame to the decking with screws. Now take the dimensions of the decking and cut the wooden planks accordingly and install them on the holes. You can use liquid nail for this. This way the new wood plank is fixed to the frame.

Step 5: Tar Paper

You can use roofing tar to fill the edges of the screws. Place the wire paper over the hole so that it is under the top layer of shingles. Then you can attach the tar paper to the decking with nails.

Step 6: Shingles Installation  

Finally, you can install new shingles over it. But remember one thing, start from the bottom and work your way up. Then nail the shingles to the roof decking.

apply roofing tar over nails

Apply roofing tar to the nails on top of these shingles to make that area waterproof.

Can I repair the roof hole myself?

If you follow all the steps as per our guide above, you can repair the roof hole yourself. But repairing a roof hole is a complex task that requires complete knowledge as well as skill. For this only roofing expert will provide you guaranteed work. If you are repairing a hole for the first time, you may miss some things that will make you more costly.

That’s why a professional roofer can help you. Meanwhile, Build In Common is providing you high quality roofers services, you can contact for more details.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *